Product introduction
Brief Information Of Fire Hydrant
Hydrants, officially called for hydrant A fixed fire-fighting facilities, the main role is to control the fuel, combustion isolated matter, eliminate ignition sources. Indoor and outdoor fire hydrant hydrant points. Fire control system includes an outdoor fire hydrant system, fire hydrant system, fire extinguisher system, and some will have automatic sprinkler systems, water cannon system, gas extinguishing systems, fire detection systems, water mist systems. Primarily for fire hydrant from the municipal water supply network or outdoor fire extinguishing water supply network to implement water can also be directly connected with water, water gun fire. Therefore, indoor and outdoor fire hydrant fire fighting system is one of the important fire-fighting facilities.
How To Use
1. Open the underground water hydrant wrench pocket connection with the switch.
2, the fire hose to connect.
3. Use a wrench to open the underground fire hydrant water valve switch.
4, connecting hose inlet and outlet tips.
5, at least two or more persons holding the spray tip, Xianghuo source water until the fire is out put out so far.
Technical Parameters
The indoor fire hydrant can be install in plant, warehouse, high building, public place, ship.
We make different styles of indoor hydrant
1. Item: SNJ 65
2. Type:SN50,SN65
3. Strength test pressure:2.4mpa
4. The indoor fire hydrant is a fixed indoor fire-fighting equipment in factories, public buildings, warehouse,etc.
Indoor fire hydrant is the connecter in the water piping network, including one valve with single outlet, One Valve with double outlet and double valve with double outlet etc. It's used to offer assistance to control the fire.
Rated working pressure:16 Bar
Strength test pressure:24Bar
A hose is attached to the fire hydrant, then the valve is opened to provide a powerful flow of water, on the order of 350 kPa (50 lbf/in²) (this pressure varies according to region and depends on various factors including the size and location of the attached water main). This hose can be further attached to a fire engine, which can then use a powerful pump to boost the water pressure and possibly split it into multiple streams. The hose may be connected with a threaded connection, instantaneous "quick" connector or a Storz connector. Care should be taken not to open or close a fire hydrant too quickly, as this can create a water hammer which can damage nearby pipes and equipment. The water inside a charged hoseline causes it to be very heavy and high water pressure causes it to be stiff and unable to make a tight turn while pressurized.
Below is our different types of landing value
Oblique landing value is suitable for installation on wet risers in a building for fire fighting purpose,permanently charged with water from a pressurized supply. The landing value are classified under low pressure and are suitable for use at nominal inlet pressure up to 15bar.
| Name: Oblique landing value |
| Material: brass |
| Size: 1.5"-2.5" |
| Inlet thread: BSP,NPT,NST... |
| Outlet thread: BSP,NPT,NST... |
Angle landing value is designed to be installed on wet risers in buildings for fire fighting purposes. It is an important source of water which is crucial for fighting fires on any level of your building. They are installed on hydrants, a branch and hose is connected to a coupling on it.By
rotating the landing valve handle anti-clockwise, you can simply activate the water flflux in the fifire
fifighting system.
| Name:Angle Landing Value |
| Connected: Threaded |
| Body: Brass |
| Handwheel: Cast iron/aluminium alloy |
| Blank cap: Copper alloy/plastic |
| Chain: ss304 |
| Test: 24bar |
| Surface:Rough brass |
Flanged landing valve is designed to be installed on wet risers in buildings for fifire fifighting
purposes. It is an important source of water which is crucial for fifighting fifires on any level of your
building. They are installed on hydrants, a branch and hose is connected to a coupling on it. By
rotating the landing valve handle anti-clockwise, you can simply activate the water flflux in the
fifire fifighting system.
| Name:flanged landing value |
| connection: flanged |
| Body: Brass |
| Handwheel: Cast iron/aluminium alloy |
| Blank cap: Copper alloy/plastic |
| Chain: ss304 |
| Test: 24bar |
| Surface:Rough brass |
Company Profile
Suzhou Seapeak Co. LTD. is a leading manufacturer and exporter of fire hose, coupling and other fire-fighting equipments in China.
Our main products: rubber lining fire hose, EPDM lining fire hose, PVC lining fire hose, PU lining fire hose. colorful fire hose, PVC/Nitrile fire hose, single jacket fire hose, double jacket fire hose and PU layflat hose. Our hose is for marine, mill, forest, fire-fighting, mine and construction.
Meanwhile, we have good cooperation with other famous international company in fire-fighting field. In 1999, we have approved ISO9000 certificate. We are also a member of FPA, CFPA.
You may be assured that we will apply you high quality and low cost products. In case you need more information on corporation and our products, please do not hesitate to contact us and we shall be very pleased to reply any of your inquiries at any time.
Workshop
Package And Shipping
Products wil be perfected protected by opp bag/Reinforced carton/stretch film/pallets. Any customized package will be acceptable.We accept ship by express including DHL/FEDEX/TNT, or ship by sea and air. Mostly we ship by sea. shipping time is within 25days by sea. Will advise exact delivery when you purchase.
Certification
Our service
Step 1:
When you are looking for something, pls send your inquiry with details and pics to me at Made in China. I will reply at the first time(faster than other suppliers) and provide good price(at least 10% lower than others). If you are interested in our products online, contact me directly with link attached.
Step 2:
Before purchase bulk order, sample can be available and free. I will advise everything you want to know about the PO, delivery, price, shipping method, package, payment...Production will be going when everything is confirmed by you.
Step 3:
After PO received, we will send you PI and you need to pay it firstly, then we will arrange bulk production, during the period, we will send you some pics when pre-product sample is finished.
Step 4:
Will inform you when shipping and send you pics when all goods are ready. As a professional supplier, will follow all the way until you receive the goods. Of course, inspection report will be provided. If needed, we can send products to SGS for testing.
FAQ
1. Where is your company and how many people there? How about your company?
We are based in Suzhou, China, start from 1998, sell to more than 20countries. There are totally 200-300 people in our office and factory.
2. How can you guarantee quality?
We will confirm everything before production, beofre shipping, inspection reported will be provided.
3. What do you provide?
We provide fire hose, coupling and fire equipments. irrigation fittings.
4. Why should we choose you?
We are the top fire hose manufacturers in Asia, we have more than 20 years experience of this industry. You will always get my quick response and good price. You will save money at the most degree from me.
What's more, quick delivery, some free sample will be acceptable.
Audited Supplier 
){kind=link}